Le forum des utilisateurs de Siril

Nouvelles:

  • L'équipe de développement de Siril est heureuse de vous accueillir dans ce forum.

    Siril est maintenant en version RC1 ;-)

    Le forum a été migré vers l'adresse www.forum.siril.org mettez à jour vos favoris !!!
  • We are delighted to welcome you to this forum

    Siril is now in RC1 version ;-)

    The forum has been migrated to www.forum.siril.org update your bookmarks!!!

Nouvelles

L'équipe de développement de Siril est heureuse de vous accueillir dans ce forum.

Siril est maintenant en version RC1 ;-)

Le forum a été migré vers l'adresse www.forum.siril.org mettez à jour vos favoris !!!

Scrip running problem

sakvaua · 17

Hors ligne sakvaua

  • Mercurien
  • *
    • Messages: 2
    • Karma: +0/-0
le: mai 09, 2019, 08:01:31 20
Hi everyone!
Thanks for such an interesting program! Extremely fast and lost of options.
The folder I refer in scrip contain 2 fit files and a sequence file. Everything works fine from the gui. It sees the sequence file and allows me to register files. But from the script it exits with "Error opening script.ssf: file type not supported.". I'm not sure what exactly is not supported.

I'm having a trouble running a script I wrote. It looks like so:

settext fit
cd 0
register NGC7129_
cd ..

#next folder
cd 1
register NGC7129_
cd ..

when I try to run it Siril give me the following error:

0:54:17: Welcome to siril v0.9.8-003
20:54:17: Supported file types: BMP images, PIC images (IRIS), PGM and PPM binary images, RAW images, FITS-CFA images, Films, SER sequences, TIFF images, JPG images, PNG images.
20:54:17: Loading init file: '/home/sakvaua/.siril/siril.cfg'
20:54:17: Setting CWD (Current Working Directory) to '/media/sakvaua/Samsung960/PixDenoise/NGC7129/TIF/L/L/0'
20:54:17: Added a registration method: One Star Registration (deep-sky)
20:54:17: Added a registration method: Global Star Alignment (deep-sky)
20:54:17: Added a registration method: Image Pattern Alignment (planetary - full disk)
20:54:17: Added a registration method: Enhanced Correlation Coefficient (planetary - surfaces)
20:54:17: Parallel processing enabled: Using 16 logical processor(s).
20:54:17: Setting CWD (Current Working Directory) to '/media/sakvaua/Samsung960/PixDenoise/NGC7129/TIF/L/L'
20:54:17: Error opening script.ssf: file type not supported.
20:54:17: Opening script.ssf failed.
20:54:17: Setting CWD (Current Working Directory) to '/media/sakvaua/Samsung960/PixDenoise/NGC7129/TIF/L/L'

For some reason I also cannot execute register command from the console. The log says "21:00:09: Unknown command: 'register' or not implemented yet"


Thanks!



Hors ligne sakvaua

  • Mercurien
  • *
    • Messages: 2
    • Karma: +0/-0
Réponse #1 le: mai 09, 2019, 09:18:52 21
Ok. I realized that the  version I installed was the old on 9.8. Reinstalled 9.11 The script was halting on empty lines. After removing them everything worked as expected.
Thanks again forthe  cool piece of software.